How to assemble the 4-stroke internal combustion engine

P1180284.JPG
The piston is pushed down the cylinder and
the conrod at the end hooks onto the
crankshaft.
P1180283.JPG
Bolt the rod cap onto the crankshaft.
P1180282.JPG
Push in the cam followers.
P1180281.JPG
Push the cam shaft into place. Match the 2
marks on the cogs to fit it properly.
P1180280.JPG
Bolt the crankcase front cover on.
P1180279.JPG
The head gasket is put in place.
In a working motor there are lots of seals
and gaskets.
P1180278.JPG
Bolt on the head.
P1180277.JPG
Push on the flywheel.
P1180276.JPG
Add the starter mechanism and it's finished!
Turn the flywheel. Does it move?